Garden Fountain Pump (MF01) – MULTI-1300

Description

Water pump for garden fountains MULTI-1300 (1200 liters/hour).

In the MULTI line we find a fountain pump ideal for gardens, ponds, lakes, waterfalls, aquariums,…

With a consumption of 1200 liters/hour.

Its 1/2″ threaded outlet facilitates coupling with a wide variety of fountain nozzles.

An ideal fountain pump model both for its high quality and price.

Water motors perfect for powering nozzles, nozzles, spouts, spouts and fountain tips.

Ideal for the creation of waterfalls and fun water games inside a decorative pond or custom-made container.

Technical data sheet for fountain pump model MULTI-1300:

• 1200 liters / hour
• 1/2″ male threaded water outlet (compatible with a multitude of fountain nozzles)
• Dimensions: (171 x 98 x h 60) mm
• Manufactured according to the highest quality and safety requirements.
• Power supply at 220V with a consumption of 20W.

Curve: Water elevation height / Consumption.

Our compatible nozzles for this 1200 liters / hour fountain pump:

• BALLERINA 1/2″❂ (BF004)
• GLOBE 1/2″ BRASS ❂ Garden fountain nozzles ❂ HONGO (BF039)
• GLOBE 1/2″ Stainless Steel and Delrin ❂ (BF001)
• SIZE 1/2″ Stainless Steel ❂ (BF003)
• 3/8″ LANCE JET NOZZLES ❂ (BF034)
• 1/2″ LANCE JET NOZZLES ❂ (BF035)
• 1/2″ LANCE JET WITH VALVE ❂ (BF015)
• Palm tree ❂ (BF002)
• 6 EQUIDISTANT JETS 1/2″ ❂ (BF006)
• Rainbow ❂ (BF023)

I recommend you to take a look at this article of our blog where you will find a brief guide to help you choose the fountain pump you need.

Manufacturer’s manual (generic for all models):

SAFETY STANDARDS:

Check that the voltage recorded on the pump corresponds to the mains voltage. The apparatus shall be powered through a differential switch (life-saving), whose rated current shall be less than or equal to 30mA. The pump can operate in “Wet&Dry” mode (submerged or out of water, with the exception of models 800 and 1300 which operate only submerged in water). The pump must not be operated dry or with liquids whose temperature exceeds 95F/35°C! Before carrying out any work on the pump, the power supply must always be disconnected. It is not possible to replace the pump power cable, so if it is damaged, the unit will have to be demolished. This product complies with current safety standards.

INSTALLATION:

Place the pump taking care that the cable is routed in an area where it will not be damaged.

Mod. 800 The water flow rate is regulated by means of the corresponding regulating element mounted both on the model with front panel and on the model with elongated pre-chamber. The pump is prepared to be coupled to 1/2″ pipes and possible fittings.

Mod. 1300 (front panel version). The pump is threaded on the delivery side only and can be fitted with commercially available 1/2″ fittings and accessories. On the suction side, a front panel equipped with an adjustment device allows varying the flow rate and discharge head of the pump.

Mod. 1300 – 2500 – 4000 – 5800 version with elongated pre-chamber. The pump contains suction and delivery threads:

• mod. 1300 of 1/2″ in the drive;
• mod. 4000 3/4″ at the discharge and 1″ at the suction;
• mod. 3000 – 4000 – 5000 – 6000 of 1″ in impulsion and suction;

The thread has a GAS (Europe) standard pitch, which allows for a wide range of fittings and accessories available on the market.

MAINTENANCE:

Mod. 800: Remove the front panel next to the regulating-tube and remove the rotor from the pump body for source. It is advisable to check the condition of the O-ring during each cleaning operation, because if it is damaged, even slightly, it can seriously jeopardize the pump’s performance and must therefore be replaced. Rinse the assembly under running water and use a small brush to remove scale, if any. To reassemble the pump, carry out the same operations but in reverse sequence.

Mod. 1300: First remove the front panel or pre-chamber to remove the rotor from the fountain pump body. Always check the tightness of the O-ring. If it is damaged, even slightly, it can seriously jeopardize the pump’s performance and must be replaced. Rinse the assembly under running water and use a small brush to remove scale, if any. To reassemble the pump, carry out the same operations but in reverse sequence.

Mod. 2500 – 4000 – 5800: Open the pre-chamber by turning the fountain pump counterclockwise. Then remove the rotor from the pump body, taking care not to damage the ceramic shaft and the rubber support washers. Always check the tightness of the O-ring because if it is damaged, even slightly, it can seriously jeopardize the performance of the pump and must be replaced. Rinse the assembly under running water and use a small brush to remove scale, if any. To reassemble the pump, carry out the same operations but in reverse sequence.